Eaton Arrow Hart 30-Amp 3-phase 480v NEMA L16-30r 4-wire Grounding Industrial Locking Connector, Red
$38.85
- Arrow Hart extra heavy-duty nylon 30A locking connector
- Arrow Hart color coded locking devices feature six color codes consistent with IEC 60309 standard to identify voltage ratings at a glance
- Arrow Hart’s signature, ergonomic grip style for easy handling and a comfortable yet secure feel
The superior safety of Eaton’s Arrow Hart ultra grip locking devices has been enhanced with color coding to provide you a quick, clear and easy way to identify your circuit voltage.
- Arrow Hart extra heavy-duty nylon 30A locking connector
- Arrow Hart color coded locking devices feature six color codes consistent with IEC 60309 standard to identify voltage ratings at a glance
- Arrow Hart’s signature, ergonomic grip style for easy handling and a comfortable yet secure feel
- Double dovetail cord grips for superior cord retention and alignment
- Removable inserts allow for optimal cord retention over a full range of cord diameters
- Grommet helps prevent debris from entering wire terminal chamber
- Terminal screws backed out – ready for wiring
- Captive tri-combo screws (Slotted, Philips and Robertson) for easy installation
| Weight | 0.51 kg |
|---|---|
| Dimensions | 4.187 × 2.282 × 2.313 cm |
| Brand | Eaton |
Anonymous –
Easy install
Anonymous –
Tightened all of the screws down and had to back one out to reinsert a wire when I did this it stripped out way too easy. You can buy these online for half the price and I won’t buy this type of item here again for that reason.
Anonymous –
great product
Anonymous –
easy to find in the store , good quality , fair cost
Anonymous –
Good product and good price
Anonymous –
Product is perfect
Anonymous –
It fits the female outlet properly, adequately, safely.
Anonymous –
Hard to think of an argument against this plug – it’s exactly what it advertises itself to be. I had a 230V, 30A motor for a dust collector with bare wired cabling. As such, I needed to wire up a plug for my L14-30 plug.
The contacts themself are inserted through the back and you just use the screws to bring the contact plate forward to be snug on your wire. There are helpful labels on the back end of the plug to make it very obvious neutral/hot/hot/ground.
I found the screws to be a *little* stiff at first but I am happy for that. Shows that the plates wont just randomly slip.
It’s hard to see in this, but there’s a rubber gasket you put your wires through at the back. Appreciate this extra protection.
The clamping system (white clips) at the back are hearty and will keep the wires from going anywhere.
If you’re using stranded wire like I am, don’t forget the CCW turning of the copper to ensure you get the wire through!
Anonymous –
Met expectations.
Anonymous –
Instructions very clear to understand, product was easy to wire up. I actually got this to create a “backfeed” cord for my home generator.
Anonymous –
Purchased to assemble extension cords for some shop equipment. This series of connectors is built like a tank and should stand up to years of shop use.
Anonymous –
Needed to make up a generator cord during the hurricane
Anonymous –
After Two to many frequent power outages ( blamed on “fallen trees” even though the Utility had contracted right of way completed just earlier this year ) I purchased these to make extension cords for my recently purchased portable generator .
The quality of fit and finish is Impeccable .
I am now prepared for the next outage .
Anonymous –
Seems like an ok product, heads of screws were a little soft so be careful to not strip them during assembly. Was a bit of a tight fit over the insulation of 10/4 300V flexible power cable.
Anonymous –
Way overpriced
Anonymous –
Very easy and effortless online purchase and pick upt the Tyler Location
Anonymous –
I liked the wire color coding on which post a specific wire went to. Easy to use.
Anonymous –
Using it with a generator, the plug feels safely and solidly connected, and there is plenty of grabbing area to feel safe when plugging and unplugging.
Anonymous –
Really liked the quality of this product, it was easy to Install the wires and was able to put on the machine we were fixing for our customer and use to run test on the unit.
Anonymous –
Nice design, great for what it is used for. Needed this for a trailer hookup. Sadly, the one that came in the box was missing the actual plug part and it went back to the store for are refund.
Anonymous –
Quality connector, robust and very well built. Kind of pricey and much larger than other connectors of the same NEMA configuration but they are very easy to terminate and assemble. Built to last.