IDEAL 25-Pack Phone Cable Splice Connector Idc Connector
$6.47
- Used for repairing broken wires and for adding an additional wire to an existing circuit
- Compatible with 26 AWG – 19 AWG solid copper, single conductor wire
- Moisture-resistant sealant protects wires from corrosion
Traditionally used in landline telephone applications, these IDC splice connectors can be used to splice, tap or repair damaged many types of low voltage conductors in voice and data applications. The IDEAL insulation displacement wire connectors (25-Pack) are designed to connect butt splices for 3-wire applications.
- Used for repairing broken wires and for adding an additional wire to an existing circuit
- Compatible with 26 AWG – 19 AWG solid copper, single conductor wire
- Moisture-resistant sealant protects wires from corrosion
- Use with solid copper single-conductor wire
- Designed for low-voltage applications
- Quick, easy one-step splicing insert unstripped conductors, crimp with 33-719 tool
- Permanent connection once crimped they cannot be reused
- Maximum insulated O.D. of 0.066 in. (1.68 mm)
- Use 1,2 or 3 ports as needed
| Weight | 0.1 kg |
|---|---|
| Dimensions | 6.4 × 0.52 × 5.1 cm |
| Brand | IDEAL |
9 reviews for IDEAL 25-Pack Phone Cable Splice Connector Idc Connector
Add a review
Related products
Cables & Connectors
$9.98
Audio & Video Wall Jacks
$16.48
Cables & Connectors
$16.98
Cables & Connectors
$10.38
Audio & Video Wall Jacks
$22.98
Cables & Connectors
$52.98
Cables & Connectors
$59.98
Cables & Connectors
$73.98
Anonymous –
Works well and simple to use
Anonymous –
I’m using these to connect cat5 cable to sensors on a solar collector. Worked very easy with no wire nuts or soldering. Great for any splicing of small wires.
Anonymous –
Easy to use but be sure to push the button down straight.
Anonymous –
These connectors are great for fastening solid core low-voltage wire. I use them on replacing all of my garage door sensor wires. As an added bonus, they are filled with a silicone like gel to prevent corrosion.
Anonymous –
when using telephone cable and you have a bad spot in your line.
these little jewels are worth it. They are quick and easy simply put the small wires that match colors into the the holes and push the top down and ole you have a splice couldn’t get any easier. I would make sure the wires stay all the way in just when you push the top down or you might not get get a good connection.
oh yeah cover with electrical tape is a good idea.
Anonymous –
They work well but make sure the clear side is toward you and you get the wires past both edges of the internal metal clip. If you are only past one you can get static . Also make sure the top is flat all the way around and do not strip the wires before putting in do not twist them together either before putting in.
Anonymous –
Really good product to replace soldering or wire nuts. A wider range of sizes would be great.
Anonymous –
only slip joint pliers or the like and the connector is a very soft touch to install.
Anonymous –
As expected