High performance 2.4 GHz digital splitters are used for splitting a single coax line into 2, 3 or 4 lines. These splitters are designed for applications that operate in the 5 MHz to 2.4 GHz range, which include: satellite, digital/HD cable TV, broadcast (over the air) TV, CCTV and other general purpose coaxial cable splitting requirements. All ports on the 2.4 GHz splitters are power pass enabled. This allows any of the ports to be used to pass power from the satellite set top box to the satellite dish or multi-switch. All splitters include an internal printed circuit board design inside of a nickel plated zinc die cast housing which helps to improve overall splitter performance in return loss, insertion loss and port-to-port isolation measurements, resulting in a stronger, cleaner signal with more protection from outside signal interference. All 2.4 GHz splitters have a solid, sealed body for improved EMT/fir performance and a standoff design which allows cables to be routed behind the splitter for tight installations. Machine formed threads on the F ports allow for smooth connector mating. Splitters include a grounding screw port for attaching ground wires and two user accessible mounting holes.
- Splits incoming signal into 2 separate signals
- 5 MHz to 2.4 GHz bandwidth IDEAL for HD satellite and digital cable TV
- PCB printed-circuit board design and soldered back for better shielding
- 2-Grounding screws eliminate the need for grounding block
- Includes two mounting screws, Phillips or slotted
- For 75Ω coaxial cable systems
- Insertion loss: 4.4dB to 6.4dB over rated frequency range
- F-Type connections
Anonymous –
We bought a Clear Stream indoor/outdoor antenna to mount in our attic. Bought some coax cable and this splitter to hook up my living room and bedrooms. It was simple to use and attach to my cable TV box, great reception.
Anonymous –
It was just what I needed, so much easier to order and not have to go to the store.
Anonymous –
I’m extremely pleased with this product. What’s noticeable right away is that it is very well built and feels very solid with some nice density to it. I’m using it to split an OTA signal from an indoor HD antenna at my home. The fear is always that the signal may be weakened or even lost when its split- that is definitely not the case in my situation. I’m now getting crystal clear HD reception to two separate channels and for some reason the signal appears to be even stronger now after splitting it with this device! I highly recommend!
Anonymous –
I was running a single cable line to my cable modem with an old splitter that was not HD-rated (only one device coming off splitter) I replaced it with this splitter and added a cable to a cable tv box. I was concerned that splitting the signal would produce poor results on one or both of the devices. Since installing, I am getting faster than ever speeds on my modem (170MBps on a 150Mbps connection). Cable TV is also great quality. Couldn’t be happier. Saved me from having to run a second cable line.
Anonymous –
Added X1 TV service to cable account and needed to split cable service between existing Internet Modem and new X1 TV Box. Splitter and two new pro cables worked to provide usable signal to both devices. HD TV activated and reception was good. Internet tested good at 180MB Down and 6MB Up. No noticeable effect on gaming. Splitter appeared to be a quality product.
Anonymous –
I like this product I used it to split Internet or cable signal on coax cable and it almost did not lose any signal strength and quality
Anonymous –
I liked what it does – mine quit working. I don’t like the price nowdays.